Interlogix NS3550-2T-8S User Manual User Manual
Page 319
IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
319
•
PD Class
Display the class of the PD attached to the port, as established by the classification
process. Class 0 is the default for PDs. The PD is powered based on PoE Class level
if system working on Classification mode. A PD shall return Class 0 to 4 in
accordance with the maximum power draw as specified by
Table 4-16-1
.
•
Power Used [W]
The Power Used shows how much power the PD currently is using.
•
Current Used [mA]
The Power Used shows how much current the PD currently is using.
• Priority
The Priority shows the port's priority configured by the user.
• Port Status
The Port Status shows the port's status.
• AF / AT Mode
Display per PoE port operates at 802.3af or 802.3at mode.
(NS3552-8P-2S Supports Only)
• Total
Show the total power and current usage of all PDs.
Buttons
Auto-refresh
:
Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.