Qos qcl lookup, Qos qcl status, Qos qcl refresh – Interlogix NS3550-2T-8S User Manual User Manual
Page 541

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
541
QoS QCL Lookup
Description:
Lookup QoS Control List.
Syntax:
QoS QCL Lookup [
Parameters:
Default Setting:
disable
Example:
Enable multicast storm control in 2fps
NS3552-8P-2S:/> QoS Storm multicast enable 2
QoS QCL Status
Description:
Show QCL status. This can be used to display if there is any conflict in QCE for differnet user types.
Syntax:
QoS QCL status [combined|static|voice_vlan|conflicts]
Parameters:
combined|static|voice_vlan|conflicts: combined : Shows the combined status
static : Shows the static user configured status
voice_vlan : Shows the status by Voice VLAN
conflicts : Shows all conflict status
(default : Shows the combined status)
QoS QCL Refresh
Description:
Resolve QCE conflict status. Same H/W resource is shared by multiple applications and it may not be available even
before MAX QCE entry. So user can release the resource in use by other applications and use this command to acquire the
resource.