Interlogix NS3550-2T-8S User Manual - Manual (Page 134)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
134
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Refreshes the displayed table starting from the "VLAN ID" input fields.
: Updates the table starting from the first entry in the VLAN Table, i.e. the entry with the lowest VLAN ID.
: Updates the table, starting with the entry after the last entry currently displayed.
4.6.6 VLAN Membership Status
This page provides an overview of membership status for VLAN users. The VLAN Membership Status screen in Figure 4-6-4
appears.
Figure 4-6-4: VLAN Membership Status for Static User Page Screenshot
The page includes the following fields:
Object Description
•
VLAN ID Indicates the ID of this particular VLAN.
•
Port Members The VLAN Membership Status Page shall show the current VLAN port members
for all VLANs configured by a selected VLAN User (selection shall be allowed by a
Combo Box). When ALL VLAN Users is selected, it shall show this information for
all the VLAN Users, and this is the default. VLAN membership allows the frames
Classified to the VLAN ID to be forwarded to the respective VLAN member ports.
•
VLAN User A VLAN User is a module that uses services of the VLAN management
functionality to configure VLAN memberships and VLAN port configuration such
as PVID and UVID. Currently we support following VLAN :

CLI/Web/SNMP: This is referred as static.

NAS: NAS provides port-based authentication, which involves
communications between a Supplicant, Authenticator, and an
Authentication Server.

MVR: MVR is used to eliminate the need to duplicate multicast traffic for
subscribers in each VLAN. Multicast traffic for all channels is sent only on
a single (multicast) VLAN.