Interlogix NS3550-2T-8S User Manual - Manual (Page 198)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
198
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous page.
4.9.4 Port Classification
This page allows you to configure the basic QoS Ingress Classification settings for all switch ports. The Port Classification screen
in Figure 4-9-4 appears.
Figure 4-9-4 : QoS Ingres Port Classification Page Screenshot
The page includes the following fields:
Object Description
• Port
The port number for which the configuration below applies.
• QoS Class
The Configuration All with available values will assign to whole ports.
Controls the default QoS class, i.e., the QoS class for frames not classified in any
other way. There is a one to one mapping between QoS class, queue and priority.
A QoS class of 0 (zero) has the lowest priority.
All means all ports will have one specific setting.
• DP Level
The Configuration All with available values will assign to whole ports.
Controls the default DP level, i.e., the DP level for frames not classified in any
other way.
All means all ports will have one specific setting.
•
PCP The Configuration All with available values will assign to whole ports.
Controls the default PCP for untagged frames.
All means all ports will have one specific setting.
•
DEI The Configuration All with available values will assign to whole ports.
Controls the default DEI for untagged frames.
All means all ports will have one specific setting.