Interlogix NS3550-2T-8S User Manual - Manual (Page 67)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
67
Figure 4-2-2: IP Configuration Page Screenshot
The Current column is used to show the active IP configuration.
Object Description
•
DHCP Client Enable the DHCP client by checking this box. If DHCP fails and the configured IP address
is zero, DHCP will retry. If DHCP server does not respond around 35 seconds and the
configured IP address is non-zero, DHCP will stop and the configured IP settings will be
used. The DHCP client will announce the configured System Name as host name to
provide DNS lookup.
•
IP Address Provide the IP address of this switch in dotted decimal notation.
•
IP Mask Provide the IP mask of this switch dotted decimal notation.
•
IP Router Provide the IP address of the router in dotted decimal notation.
• VLAN ID
Provide the managed VLAN ID. The allowed range is 1 through 4095.
• DNS Server
Provide the IP address of the DNS Server in dotted decimal notation.
• DNS Proxy
When DNS proxy is enabled, DUT will relay DNS requests to the current configured DNS
server on DUT, and reply as a DNS resolver to the client device on the network.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.