Interlogix NS3550-2T-8S User Manual - Manual (Page 534)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
534
Parameters:
: Port list or 'all', default: All ports
enable : Enable DSCP ingress translation
disable : Disable DSCP ingress translation
(default: Show DSCP ingress translation mode)
Default Setting:
disable
Example:
Enable DSCP ingress translation on all port.
NS3552-8P-2S:/>qos Port DSCP Translation 1-10 enable
QoS Port DSCP Classification
Description:
Set or show DSCP classification based on QoS class and DP level.
This enables per port to map new DSCP value based on QoS class and DP level.
Syntax:
QoS Port DSCP Classification [] [none|zero|selected|all]
Parameters:
: Port list or 'all', default: All ports
none : No DSCP ingress classification
zero : Classify DSCP if DSCP = 0
selected : Classify DSCP for which class. mode is 'enable'
all : Classify all DSCP
(default: Show port DSCP ingress classification mode)
Default Setting:
none
Example:
Set DSCP classification based on QoS class and DP level in zero
NS3552-8P-2S:/> QoS Port DSCP Classification 1-10 zero