Interlogix NS3550-2T-8S User Manual - Manual (Page 102)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
102
4.3.4 SNMPv3 Configuration
4.3.4.1 SNMPv3 Communities
Configure SNMPv3 communities table on this page. The entry index key is Community. The SNMPv3 Communities screen in
Figure 4-3-3 appears.
Figure 4-3-3: SNMPv3 Communities Configuration Page Screenshot
The page includes the following fields:
Object Description
•
Delete Check to delete the entry. It will be deleted during the next save.
•
Community Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is ASCII characters from
33 to 126. The community string will be treated as security name and map a
SNMPv1 or SNMPv2c community string.
•
Source IP Indicates the SNMP access source address. A particular range of source
addresses can be used to restrict source subnet when combined with source
mask.
•
Source Mask Indicates the SNMP access source address mask.
Buttons
: Click to add a new community entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.