9 windows platform radius server configuration – Interlogix NS3550-2T-8S User Manual User Manual
Page 260
IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
260
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Clears the counters for the selected server. The "Pending Requests" counter will not be cleared by this operation.
4.11.9 Windows Platform RADIUS Server Configuration
Setup the RADIUS server and assign the client IP address to the Managed switch. In this case, field in the default IP Address
of the Managed Switch with 192.168.0.100. And also make sure the shared secret key is as same as the one you had set at
the Managed Switch’s 802.1x system configuration – 12345678 at this case.
1.
Configure the IP Address of remote RADIUS server and secret key.
Figure 4-11-10: RADIUS Server Configuration Screenshot