15 mvr status, 16 mvr groups information – Interlogix NS3550-2T-8S User Manual User Manual
Page 191
IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
191
4.8.15 MVR Status
This page provides MVR status. The MVR Status screen in
Figure 4-8-18
appears.
Figure 4-8-18: MVR Status Page Screenshot
The page includes the following fields:
Object
Description
• VLAN ID
The Multicast VLAN ID
• IGMP/MLD
Queries Received
The number of Received Queries for IGMP and MLD, respectively.
• IGMP/MLD
Queries Transmitted
The number of Transmitted Queries for IGMP and MLD, respectively.
• IGMPv1 Joins
Received
The number of Received IGMPv1 Joins.
• IGMPv2/MLDv1
Reports Received
The number of Received IGMPv2 Joins and MLDv1 Reports, respectively.
• IGMPv3/MLDv2
Reports Received
The number of Received IGMPv3 Joins and MLDv2 Reports, respectively.
• IGMPv2/MLDv1 Leaves
Received
The number of Received IGMPv2 Leaves and MLDv1 Dones, respectively.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Clears MVR Statistics counters.
4.8.16 MVR Groups Information
Entries in the MVR Group Table are shown on this page. The MVR Group Table is sorted first by VLAN ID, and then by group.
Each page shows up to 99 entries from the MVR Group table, default being 20, selected through the "entries per page" input field.
When first visited, the web page will show the first 20 entries from the beginning of the MVR Group Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MVR Group Table.
The MVR Groups Information screen in
Figure 4-8-19
appears.