Interlogix NS3550-2T-8S User Manual - Manual (Page 247)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
247
Tx Request ID dot1xAuthEapolReqIdFr
amesTx The number of EAPOL
Request Identity frames that
have been transmitted by
the switch.
Tx Requests dot1xAuthEapolReqFra
mesTx The number of valid EAPOL
Request frames (other than
Request Identity frames)
that have been transmitted
by the switch.
• Backend Server
Counters
These backend (RADIUS) frame counters are available for the following administrative
states:

Port-based 802.1X

Single 802.1X

Multi 802.1X

MAC-based Auth.
Direction Name IEEE Name Description
Rx Access
Challenges dot1xAuthBackendAcce
ssChallenges 802.1X-based:
Counts the number of times
that the switch receives the
first request from the backend
server following the first
response from the supplicant.
Indicates that the backend
server has communication
with the switch.
MAC-based:
Counts all Access Challenges
received from the backend
server for this port (left-most
table) or client (right-most
table).
Rx Other
Requests dot1xAuthBackendOther
RequestsToSupplicant 802.1X-based:
Counts the number of times
that the switch sends an EAP
Request packet following the
first to the supplicant. Indicates
that the backend server chose
an EAP-method.
MAC-based:
Not applicable.
Rx Auth.
Successes dot1xAuthBackendAuth
Successes 802.1X- and MAC-based:
Counts the number of times
that the switch receives a
success indication. Indicates
that the supplicant/client has
successfully authenticated to
the backend server.
Rx Auth.
Failures dot1xAuthBackendAuth
Fails 802.1X- and MAC-based:
Counts the number of times
that the switch receives a
failure message. This
indicates that the
supplicant/client has not
authenticated to the backend
server.
Tx Responses dot1xAuthBackendResp
onses 802.1X-based:
Counts the number of times
that the switch attempts to
send a supplicant's first
response packet to the
backend server. Indicates the
switch attempted
communication with the