Interlogix NS3550-2T-8S User Manual - Manual (Page 332)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
332
: Click to refresh the page immediately.
: Updates the table starting from the first entry in the Alarm Table, i.e. the entry with the lowest ID.
: Updates the table, starting with the entry after the last entry currently displayed.
4.18.3 RMON Event Configuration
Configure RMON Event table on this page. The entry index key is ID; screen in Figure 4-18-3 appears.
Figure 4-18-3: RMON event configuration page screenshot
The page includes the following fields:
Object Description
• Delete
Check to delete the entry. It will be deleted during the next save.
• ID
Indicates the index of the entry. The range is from 1 to 65535.
• Desc
Indicates this event, the string length is from 0 to 127, default is a null string.
• Type
Indicates the notification of the event, the possible types are:

none: The total number of octets received on the interface, including
framing characters.
 log: The number of uni-cast packets delivered to a higher-layer protocol.
 snmptrap: The number of broad-cast and multi-cast packets delivered to a
higher-layer protocol.
 logandtrap: The number of inbound packets that are discarded even the
packets are normal.
• Community Specify the community when trap is sent, the string length is from 0 to 127, default
is "public".
• Event Last Time Indicates the value of sysUpTime at the time this event entry last generated an
event.
Buttons
: Click to add a new community entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.