Interlogix NS3550-2T-8S User Manual - Manual (Page 404)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
404
Add access management IPv6 entry, default: Add all supported protocols.
Syntax:
Security Switch Access Ipv6 Add [web] [snmp] [telnet]
Parameters:
: entry index (1-16)
: Start IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example, 'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax
that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can only appear once. It also used a following legally IPv4 address. For example,'::192.1.2.34'.
: End IPv6 address.
IPv6 address is in 128-bit records represented as eight fields of up to four hexadecimal digits with a colon
separates each field (:). For example,'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax
that can be used as a shorthand way of representing multiple 16-bit groups of contiguous zeros; but it
can only appear once. It also used a following legally IPv4 address. For example,'::192.1.2.34'.
web : Indicates that the host can access the switch from HTTP/HTTPS
snmp : Indicates that the host can access the switch from SNMP
telnet : Indicates that the host can access the switch from TELNET/SSH
Example:
Add access management list from 2001::0001 to 2001::0100 via web interface.
NS3552-8P-2S:/> security switch access add 2001::0001 2001::0100 web
Security Switch Access Delete
Description:
Delete access management entry.
Syntax:
Security Switch Access Delete
Parameters:
: entry index (1-16)
Example:
Delete access management ID 1