Interlogix NS3550-2T-8S User Manual - Manual (Page 40)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
40
■ Reset Button
At the left of the front panel, the reset button is designed for rebooting the Industrial Managed Switch without turning off
and on the power. It also can reset the Industrial Managed Switch to factory default mode.
Figure 2-3: Reset button of Industrial Managed Switch
Reset Button Pressed and Released Function
< 5 sec: System Reboot Reboot the Industrial Managed Switch
> 10 sec: Factory Default
Reset the Industrial Managed Switch to Factory Default
configuration. The Industrial Managed Switch will then reboot
and load the default settings as below:
。 Default Username: admin
。 Default Password: admin
。 Default IP address: 192.168.0.100
。 Subnet mask: 255.255.255.0
。 Default Gateway: 192.168.0.254