Interlogix NS3550-2T-8S User Manual - Manual (Page 34)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
34
1.5 Product Specifications
Product NS3552-8P-2S
NS3550-2T-8S
Hardware Specification
Copper Ports 2 10/ 100/1000Base-T RJ-45s 2 10/100/1000Base-T Ethernet interface
SFP/mini-GBIC
Slots 8 1000Base-SX/LX/BX SFP interfaces
Compatible with 100Base-FX SFP
8 100/1000Base-SX/LX mini-GBIC SFP slots
Console 1 x RJ-45-to-RS-232 serial port (115200, 8, N, 1)
Switch
Architecture
Store-and-Forward Store-and-Forward
Switch Fabric 20Gbps / non-blocking 20Gbps / non-blocking
Throughput
(packet per
second)
14.8Mpps@ 64Bytes packet 14.8Mpps
Address Table
8K entries, automatic source address learning and
ageing 8K entries, automatic source address learning and
ageing
Share Data
Buffer
4Mbits
Flow Control
IEEE 802.3x Pause Frame for Full-Duplex
Back pressure for Half-Duplex IEEE 802.3x Pause Frame for Full-Duplex. Back
pressure for Half-Duplex
Jumbo Frame 9Kbytes 9Kbytes
Reset Button
< 5 sec: System reboot
> 10 sec: Factory Default
< 5 sec: System reboot
> 10 sec: Factory Default
ESD Protection 6KV DC 6KV DC
EFT Protection 6KV DC 6KV DC
Enclosure IP30 Aluminum Metal Case IP30 Aluminum Metal Case
Installation DIN Rail Kit and Wall Mount Kit DIN Rail Kit and Wall Mount Kit
Connector
Removable 6-pin terminal block for power input
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for
Power 2
Removable 6-pin terminal block for DI/DO interface
Pin 1/2 for DI 1 & 2; Pin 3/4 for DO 1 & 2; Pin 5/6 for
GND
Alarm
One relay output for power failure. Alarm Relay
current carry ability: 1A @ DC 24V One relay output for power fail. Alarm Relay current
carry ability: 1A @ DC 24V
DI/DO
2 Digital Input (DI): Level 0: -24V~2.1V (±0.1V)
Level 1: 2.1V~24V (±0.1V)
Input Load to 24V DC, 10mA max.
2 Digital Output (DO): Open collector to 24VDC,
100mA max.
LED Indicator
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
Ring Owner (Green)
Per 10/100/1000T RJ-45 Ports:
PoE In-Use (Orange) (NS3552-8P-2S only)
LNK/ACT (Green)
Per SFP Interface:
1000
(Orange)
LNK/ACT (Green)
System:
Power 1 (Green)
Power 2 (Green)
Fault Alarm (Green)
Ring (Green)
R.O. (Green)
Per 10/100/1000T RJ-45 Ports:
1000 (Green)
10/100, LNK/ACT (Orange)
Per SFP Interface:
1000 LNK/ACT
(Green)
100 LNK/ACT (Orange)
Dimensions (W
x D x H)
152 x 107x 72mm 152 x 107x 72mm
Weight 1684g 1036g
Power
Requirements
DC 48V DC 12 to 48V, AC 24V Power Adapter
Power At/31.9 watts / 108.78BTU (Full loading without PoE 13.92 Watts / 47.76BTU (Full loading)