Interlogix NS3550-2T-8S User Manual - Manual (Page 372)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
372
6.3 Port Management Command
Port Configuration
Description:
Show port configuration.
Syntax:
Port Configuration [] [up|down]
Parameters:
: Port list or 'all', default: All ports
up : Show ports, which are up
down : Show ports, which are down
(default: Show all ports)
Example:
Display port1~4 status
NS3552-8P-2S:/>port configuration 1-4
Port Configuration:
===================
Port State Mode Flow Control MaxFrame Power Excessive Link
---- -------- ------ ------------ -------- -------- --------- ----
1 Enabled Auto Disabled 9600 Disabled Discard Down
2 Enabled Auto Disabled 9600 Disabled Discard Down
3 Enabled Auto Disabled 9600 Disabled Discard Down
4 Enabled Auto Disabled 9600 Disabled Discard Down
Port Mode
Description:
Set or show the port speed and duplex mode.
Syntax:
Port Mode [] [auto|10hdx|10fdx|100hdx|100fdx|1000fdx]
Parameters:
: Port list or 'all', default: All ports
auto : Auto negotiation of speed and duplex
10hdx : 10 Mbps, half duplex
10fdx : 10 Mbps, full duplex