Interlogix NS3550-2T-8S User Manual - Manual (Page 199)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
199
•
Tag Class Shows the classification mode for tagged frames on this port.

Disabled: Use default QoS class and DP level for tagged frames.

Enabled: Use mapped versions of PCP and DEI for tagged frames.
Click on the mode in order to configure the mode and/or mapping.
For more detail information, please refer to chapter 4.9.3.1.
•
DSCP Based Click to Enable DSCP Based QoS Ingress Port Classification.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.4.1 QoS Ingress Port Tag Classification
The classification modes for tagged frames are configured on this page. The QoS Ingress Port Tag Classification screen in Figure
4-9-5 appears.
Figure 4-9-5 : QoS Ingres Port Tag Classification Page Screenshot
The page includes the following fields: