Interlogix NS3550-2T-8S User Manual - Manual (Page 513)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
513
MEP Peer MEP
Description:
MEP Peer MEP id configuration.
Syntax:
MEP peer MEP [] [] [] [enable|disable]
Parameters:
: Instance number
: This MEP id (0-0x1FFF)
: MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
enable|disable: enable/disable
MEP Continuity Check Configuration
Description:
MEP Continuity Check configuration
'prio' is the priority (PCP) of transmitted CCM frame
'300s|100s|10s|1s|6m|1m|6h' is the number of CCM frame pr. second.
Syntax:
MEP cc config [] [] [300s|100s|10s|1s|6m|1m|6h] [enable|disable]
Parameters:
: Instance number
: OAM PDU priority
300s|100s|10s|1s|6m|1m|6h: OAM period (100s -> 100 PDU pr. second)
enable|disable : enable/disable
MEP Loss Measurement Configuration
Description:
MEP Loss Measurement configuration
'prio' is the priority (PCP) of transmitted LM frame
'uni|multi' is selecting uni-cast or multi-cast transmission of LM frame
'single|dual' is selecting single-ended (LMM) or dual-ended (CCM) LM
'10s|1s|6m|1m|6h' is the number of LM frame pr. second