Interlogix NS3550-2T-8S User Manual - Manual (Page 209)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
209
: Moves the QCE up the list.
: Moves the QCE down the list.
: Deletes the QCE.
: The lowest plus sign adds a new entry at the bottom of the list of QCL.
4.9.11.1 QoS Control Entry Configuration
The QCE Configuration screen in Figure 4-9-14 appears.
Figure 4-9-14: QCE Configuration Page Screenshot
The page includes the following fields:
Object Description
•
Port Members Check the checkbox button in case you what to make any port member of the
QCL entry. By default all ports will be checked
•
Key Parameters Key configuration is described as below:

Tag Value of Tag field can be 'Any', 'Untag' or 'Tag'.

VID Valid value of VLAN ID can be any value in the range 1-4095 or
'Any'; user can enter either a specific value or a range of VIDs.

PCP Priority Code Point: Valid value PCP are specific (0, 1, 2, 3, 4, 5, 6,
7) or range (0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.

DEI Drop Eligible Indicator: Valid value of DEI can be any of values
between 0, 1 or 'Any'.

SMAC Source MAC address: 24 MS bits (OUI) or 'Any'.

DMAC Type Destination MAC type: possible values are unicast (UC),
multicast (MC), broadcast (BC) or 'Any'.

Frame Type Frame Type can have any of the following values:
1.
Any
2. Ethernet
3. LLC
4. SNAP