Interlogix NS3550-2T-8S User Manual - Manual (Page 188)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
188
4.8.13 MLDv2 Information
Entries in the MLD SFM Information Table are shown on this page. The MLD SFM (Source-Filtered Multicast) Information Table
also contains the SSM (Source-Specific Multicast) information. This table is sorted first by VLAN ID, then by group, and then by
Port No. Different source addresses belong to the same group are treated as single entry.
Each page shows up to 64 entries from the MLD SFM Information table, default being 20, selected through the "entries per page"
input field. When first visited, the web page will show the first 20 entries from the beginning of the MLD SFM Information Table.
The "Start from VLAN", and "group" input fields allow the user to select the starting point in the MLD SSM Information Table. The
MLDv2 Information screen in Figure 4-8-16 appears.
Figure 4-8-16: MLD SSM Information Page Screenshot
The page includes the following fields:
Object Description
• VLAN ID
VLAN ID of the group.
• Group
Group address of the group displayed.
• Port Switch port number.
•
Mode Indicates the filtering mode maintained per (VLAN ID, port number, Group
Address) basis. It can be either Include or Exclude.
• Source Address IP Address of the source. Currently, system limits the total number of IP source
addresses for filtering to be 128.
• Type Indicates the Type. It can be either Allow or Deny.
• Hardware Filter /
Switch
Indicates whether data plane destined to the specific group address from the
source IPv6 address could be handled by chip or not.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Updates the table starting from the first entry in the MLD SFM Information.
: Updates the table, starting with the entry after the last entry currently displayed.