Interlogix NS3550-2T-8S User Manual - Manual (Page 182)

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
182
Figure 4-8-11: MLD Snooping Configuration Page Screenshot
The page includes the following fields:
Object Description
•
Snooping Enabled Enable the Global MLD Snooping.
•
Unregistered IPMCv6
Flooding Enabled Enable unregistered IPMCv6 traffic flooding. Please note that disabling
unregistered IPMCv6 traffic flooding may lead to failure of Neighbor Discovery.
• MLD SSM Range
SSM (Source-Specific Multicast) Range allows the SSM-aware hosts and routers
run the SSM service model for the groups in the address range.
• Leave Proxy Enable
Enable MLD Leave Proxy. This feature can be used to avoid forwarding
unnecessary leave messages to the router side.
• Proxy Enable
Enable MLD Proxy. This feature can be used to avoid forwarding unnecessary join
and leave messages to the router side.
• Router Port
Specify which ports act as router ports. A router port is a port on the Ethernet
switch that leads towards the Layer 3 multicast device or MLD querier.
If an aggregation member port is selected as a router port, the whole aggregation
will act as a router port. All means all ports will have one specific setting.
• Fast Leave
Enable the fast leave on the port.
• Throttling
The Configuration All with available values will assign to whole items.
Enable to limit the number of multicast groups to which a switch port can belong.
All means all ports will have one specific setting.