Interlogix NS3550-2T-8S User Manual User Manual
Page 229

IFS NS3552-8P-2S AND NS3550-2T-8S User Manual
229
Figure 4-10-4: ACL Ports Configuration Page Screenshot
The page includes the following fields:
Object
Description
•
Port
The logical port for the settings contained in the same row.
•
Policy ID
Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
•
Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit". All means all ports will have one specific setting.
•
Rate Limiter ID
Select which rate limiter to apply to this port. The allowed values are Disabled or
the values 1 through 15. The default value is "Disabled". All means all ports will
have one specific setting.
•
Port Redirect
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number. The default value is "Disabled". All means all ports will
have one specific setting.
• Mirror
Specify the mirror operation of this port. The allowed values are:
Enabled: Frames received on the port are mirrored.
Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
All means all ports will have one specific setting.
• Logging
Specify the logging operation of this port. The allowed values are:
Enabled: Frames received on the port are stored in the System Log.
Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate is limited.
All means all ports will have one specific setting.
• Shutdown
Specify the port shut down operation of this port. The allowed values are:
Enabled: If a frame is received on the port, the port will be disabled.
Disabled: Port shut down is disabled.
The default value is "Disabled".
All means all ports will have one specific setting.
• State
Specify the port state of this port. The allowed values are:
Enabled: To reopen ports by changing the volatile port configuration of the ACL
user module.
Disabled: To close ports by changing the volatile port configuration of the ACL
user module.
The default value is "Enabled".
All means all ports will have one specific setting.
• Counter
Counts the number of frames that match this ACE.