KEYENCE LS-7600 - Manual (Page 85)

5-23
Chapter 5 Function Settings
5
■
Procedure for Calibration Settings
Take the following procedure if the remote control console is used.
1
Set the [Slide Switch] key to PROG.
The LCD monitor changes to the PROGRAM SETUP screen from the RUN screen.
2
Press the [Down] key and move the
cursor to CALIB.
3
Press the [ENT] key.
A frame is displayed on the AREA1 side.
AREA1 THEORY
T1-A ✽✽✽✽✽✽✽✽✽
T1-B ✽✽✽✽✽✽✽✽✽
T2-A ✽✽✽✽✽✽✽✽✽
T2-B ✽✽✽✽✽✽✽✽✽ SET
AREA2 THEORY
T1-A ✽✽✽✽✽✽✽✽✽
T1-B ✽✽✽✽✽✽✽✽✽
T2-A ✽✽✽✽✽✽✽✽✽
T2-B ✽✽✽✽✽✽✽✽✽ SET
CAM1
PROG
P — 00
LIMIT
AREA
OUTPUT
CALIB
OPTION
A1 2
A2 2
01/02/18
17:50:42
■ Calibration Settings for AREA1
(1) Press the [ENT] key.
■ Calibration Settings for AREA2
(1) Press the [Down] key and move
the frame to AREA2.
(2) Press the [ENT] key.
AREA1 THEORY
12.34560
T1-A 5.003000
T1-B 5.000000
T2-A 10.006000
T2-B 10.000000 SET
AREA2 THEORY
23.45670
T1-A 5.003000
T1-B 5.000000
T2-A 10.006000
T2-B 10.000000 SET
CAM1
PROG
P – 00
LIMIT
AREA
OUTPUT
CALIB
OPTION
A1 2
A2 2
01/02/18
17:50:42
AREA1 THEORY
T1-A ✽✽✽✽✽✽✽✽✽
T1-B ✽✽✽✽✽✽✽✽✽
T2-A ✽✽✽✽✽✽✽✽✽
T2-B ✽✽✽✽✽✽✽✽✽ SET
AREA2 THEORY
T1-A ✽✽✽✽✽✽✽✽✽
T1-B ✽✽✽✽✽✽✽✽✽
T2-A ✽✽✽✽✽✽✽✽✽
T2-B ✽✽✽✽✽✽✽✽✽ SET
CAM1
PROG
P – 00
LIMIT
AREA
OUTPUT
CALIB
OPTION
A1 2
A2 2
01/02/18
17:50:42