KEYENCE LS-7600 - Manual (Page 113)

5-51
Chapter 5 Function Settings
5
Limit Settings
■
Reference Value
1
Press the [ENT] key.
The cursor is displayed at UPPER (upper limit).
2
Press the [ENT] key. The cursor moves to +, where numeric input is possible.
3
Press the [Up or Down] key and
select + or –.
4
Press the [Left or Right] key and
move the cursor to the digit where the
value is input.
5
Press the [Up or Down] key and
select the value.
6
Repeat steps 4 and 5 to input all the
digits.
7
Press the [ENT] key.
The input value is entered and the
cursor returns to UPPER.
Note: If there is any input value error, the value will not be entered but the cursor will
return to the setting item.
8
Press the [Up or Down] key and select STANDARD (Reference value) or
LOWER (Lower limit). Then take steps similar to the above 1 through 7.
■
Threshold
1
Press the [ENT] key.
The cursor is displayed at HH (highest limit).
2
Press the [ENT] key.
The cursor moves to +, where numeric input is possible.
OUT1
UPPER + 01.00000
STANDARD 10.00000
LOWER —1.00000
OUT1
UPPER +0 1 .00000
STANDARD 10.00000
LOWER —1.00000