KEYENCE LS-7600 - Manual (Page 35)

1-21
1
Chapter 1 Getting Started
Environment Settings
Program Settings
RUN mode
Make basic settings for the
operation of the LS-7600
Series.
Settings for measurement are registered as programs. The following settings
are possible.
• Tolerance Setting
Set the tolerance range of the measured value.
• Area Setting
Set the measuring part.
• Compensation Setting
Set the compensation detail of errors in measurement.
• Output Setting
Set the processing and output details of the measured value.
• Option Setting
Set the display unit and other items.
Measures according to the set
program.
The LS-7600 Series will be reset to the initial status by turning the LS-7600 Series on
with the [Zero] key pressed. (Page 1-22)
Power
On
RUN
PROG
Refer to Section 4 Operation Control on page 4-1.
Refer to Section 5 Function Setting on page 5-1.
Refer to Section 6 Environment Settings on page 6-1.
RUN
PROG
or the [Slide switch] key operation on the console.
Press the [ESC] key for
2 seconds. [ESC] key
Measurement and Setting Overview
The LS-7600 Series has two modes (i.e., the RUN mode and PROGRAM mode). Program
settings (measuring condition settings) and environment settings (basic settings) can be
made in the LS-7601 in PROGRAM mode.