KEYENCE LS-7600 - Manual (Page 141)

6-7
Chapter 6 Environment Settings
6
RS-232C
Take the following steps to make the communication settings for the RS-232C interface and
relative settings for peripheral devices.
Tips
Communication settings for the RS-232C interface vary with the peripheral
device to be connected or the type of output desired. For the details of RS-
232C, refer to Chapter 8 RS-232C on page 8-1.
Setting Items
The following items can be set.
• Baud rate:
Set the speed of data transmission to 1200, 2400, 4800,
9600, 19200, 38400, 57600, or 115200 bps.
• Parity: Set the parity to NONE, EVEN, or ODD.
• Stop bit: Set the stop bit length to 1 or 2.
• Data length: Set the length of transmission data to 7 or 8.
• Data mode: Set the data mode to Normal, PLC, Printer 1 or Printer 2
according to the peripheral device to be connected.
• Data transmission mode: Set the data transmission mode to OFF, S1, S2, or S3.
■
Baud Rate
1
Press the [Up or Down] key and select BAUDRATE.
2
Press the [ENT] key.
The cursor moves to the setting item.
3
Press the [Up or Down] key and select communication speed.
4
Press the [ENT] key.
The input item is entered and the cursor returns to BAUDRATE.
■
Parity
1
Press the [Up or Down] key and select PARITY.
2
Press the [ENT] key.
The cursor moves to the setting item.