KEYENCE LS-7600 - Manual (Page 165)

8-3
Chapter 8 RS-232C
8
■
RS-232C Connection Settings
Make the following environment settings according to the connecting device. For details,
go to the reference pages indicated in the table. Refer to page 6-7 for RS-232C environ-
ment setting details.
External device
NORMAL
OFF
S1/S2
KV-series
(KV mode)
PLC
Reference page
Environment setting item
D-MODE D-SEND
Non-protocol communications with PCs
or PLC link units.
KV <=> LS
(Command transmission
and reception)
KV <= LS
(KV for command
reception only)
Measured Value Output
and Setting Changes
with Commands (Page
8-4)
Output of Measured
Values under External
Synchronous Control
(Page 8-26)