KEYENCE LS-7600 - Manual (Page 67)

5-5
Chapter 5 Function Settings
5
■
Output Settings (Page 5-29)
Item Default
Area calculation (CALC)
OUT1: +1A1+0A2
OUT2: +0A1+1A2
Averaging number (AVE) 512
Measuring mode (MEA-MODE) Normal
Offset
Threshold
Reference
value
0.00000
-99.99995 to +99.99995mm ❈
+30.00000
0.00000
1000 μ m/V
OFF OFF, ON
+10.5V, Hold, 0V
0.4, 0.8, 1.6, 3.3, 6.6, 13.3, 26.6ms
OFF, 0.4, 0.8, 1.6, 3.3, 6.6, 13.3, 26.6ms
+10.5V
0.4ms
N.O.
OFF
Possible setting range
+0, +1, +1/2, -1, -1/2
Scaling at 10 V
(A-OUT+10)
Scaling at –10 V
(A-OUT-10)
Analog output setting: Analog update mode (A-SET)
Analog output setting: Output
waiting voltage (A-CONT)
Comparator output setting: Strobe
output time (STOBE-T)
Comparator output setting: Output
logic (OUT-SET)
Comparator output setting:
Off-delay time (OFF-DLY)
Scaling (A-SCALE)
1, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024,
2048, 4096
1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000,
5000, 10000
μ m/V
Normally open (N.O.)
Normally closed (N.C.)
Normal
Peak hold (P-HOLD)
Bottom hold (B-HOLD)
Peak-to-peak hold (D-HOLD)
Average hold (AV-HOLD)
Automatic peak hold (A-P-HOLD)
Automatic bottom hold (A-B-HOLD)
Automatic peak-to-peak hold (A-D-HOLD)
Sample hold 1 (S-HOLD1)
Sample hold 2 (S-HOLD2)
Self-timing hold (SELF-T)
Self-timing period: 1 to 9999 ms
(By default set to 100 ms)
■
Option Settings (Page 5-55)
mm(mm), μ m(um), UNIT1(inch), UNIT2(mil)
mm: 0.00001, 0.00002, 0.00005,
0.0001, 0.0002, 0.001,
0.01, 0.1
Item Default
Tolerance mode (LIMITS) DEV
Timing mode (T-MODE) ASYNC
Unit (D-UNIT) mm
Minimum display unit (D-RES) 0.00005
I/O mode SUB
Possible setting range
Reference value (DEV) or threshold (TOL)
Synchronous (SYNC) or asynchronous (ASYNC)
SUB mode (SUB), BCD mode (BCD)
Trend graph mode
(GRAPH-T)
Statistical processing
mode (STATS)
Group processing (GROUP)
Application mode (APP-MODE)
1m
1m
OFF
OFF
OFF
OFF
OUT1
OUT1
OUT2
OUT2
1m, 10m, 30m, 1H, 2H, 6H, 12H, 24H
1m, 10m, 30m, 1H, 2H, 6H, 12H, 24H
OFF, EXT, 2 to 9999999
OFF, EXT, 2 to 9999999
OFF, 2 to 255
OFF, DRILL, DUAL
❈ Items in parentheses indicate what displayed on the LCD monitor.
❈ Displayed values are based on a minimum display unit of 0.00005 millimeters. Refer
to page 5-58 for other types of minimum display units.