KEYENCE LS-7600 - Manual (Page 125)

5-63
Chapter 5 Function Settings
5
3
Press the [Up or Down] key and
select the statistical processing
mode.
The following table lists available set-
tings items with corresponding displays
on the LCD monitor.
Statistical processing OFF OFF
Setting LCD monitor
External sync EXT
Internal sync 1000
LIMITS DEV
T-MODE ASYNC
D-UNIT mm
D-RES 0.00005
C-OUT SUB
GRAPH-T
OUT1 1m
OUT2 1m
STATS
OUT1 OFF
OUT2 OFF
GROUP OFF
APP-MODE OFF
■ Internal Sync Selected
(1) Press the [ENT] key.
The cursor moves to the 0 and numeric input is available.
(2) Press the [Left or Right] key and move the cursor to the digit where the
value is input.
(3) Press the [Up or Down] key and
select the value.
(4) Repeat steps (2) and (3) until all
the digits are input.
LIMITS DEV
T-MODE ASYNC
D-UNIT mm
D-RES 0.00005
C-OUT SUB
GRAPH-T
OUT1 1m
OUT2 1m
STATS
OUT1 1000
OUT2 OFF
GROUP OFF
APP-MODE OFF
4
Press the [ENT] key.
The input item is entered and the cursor moves to STATS of GRAPH-T.
Group Processing
Take the following steps to enable or disable group processing and the number of groups.
Refer to Group processing (GROUP) on page 5-65 for details.
Setting Range
Select the set value from the following ones.
OFF, 2~255
1
Press the [Up or Down] key and move the cursor to GROUP.