Rockwell Automation FlexPak 3000 Digital DC Drive Version 4.3 - Manual (Page 170)

C-8 FlexPak 3000 DC Drive Software Reference
MAXIMUM SPEED (P.004) 1 to TOP SPEED ( RPM or user-defined
units)
500 RPM
METER OUT 1 GAIN ADJ (P.400) 1.100 to 1.900 1.000
METER OUT 1 SELECT (P.404) • CML FEEDBACK (P.397)
• CML REFERENCE (P.396)
• CML ERROR (P.398)
• SPD LOOP FEEDBACK (P.296)
• SPD LOOP REFERENCE (P.295)
• SPD LOOP ERROR (P.297)
• SPD LOOP OUTPUT (P.299)
• SPEED RAMP OUTPUT (P.199)
• SPEED RAMP INPUT TP (P.198)
• SPD SOURCE SELECT OUT (P.193)
• TRIM OUTPUT (P.197)
• ARMATURE VOLTAGE (P.289)
• ANALOG TACH FEEDBACK (P.291)
• PULSE TACH FEEDBACK (P.292)
• ZERO
• FULL SCALE
• POWER OUTPUT
• OCL REFERENCE (P.845)
• OCL RAMP OUTPUT (P.846)
• OCL FEEDBACK (P.847)
• OCL OUTPUT (P.848)
• FIELD REFERENCE (P.590)
• FIELD FEEDBACK (P.589)
• NETW IN REG 1 (P.905)
• NETW IN REG 2 (P.906)
• NETW IN REG 3 (P.907)
CML FEEDBACK
METER OUT 1 ZERO ADJ (P.402) –200 to 200 0
METER OUT 2 GAIN ADJ (P.401) 0.100 to 1.900 1.000
Table C.1 – Parameter Settings Quick Reference Table (Continued)
Parameter
Parameter Selection/
Adjustment Range
Initial Factory
Setting (Default)
Your Data
Date Setting