Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual

Page 70

3–12

Programming Terminal

Publication 1397-5.0 — June, 2001

Search Mode

1. This mode allows you to search through the

parameter list and display all parameters that
are not at the factory default values.

A. From the Status Display, press Enter (or

any key). “Choose Mode” will be
shown.

B. Press the Increment (or Decrement) key

until “Search” is displayed.

C. Press Enter. The HIM will search

through all parameters and display any
parameters that are not at their factory
default values.

D. Press the Increment (or Decrement) key

to scroll through the list.

Choose Mode
Search

Choose Mode
Display

Control Status Mode

Choose Mode
Control Status

Choose Mode
Display

Control Logic
Disabled

Control Status
Control Logic

1. This mode allows the Drive logic mask to be

disabled, thus preventing a Serial Fault
when the HIM is removed with Drive power
applied.

A. From the Status Display, press Enter (or

any key). “Choose Mode” will be
shown.

B. Press the Increment (or Decrement) key

until “Control Status” is displayed. Press
Enter.

C. Select “Control Logic” using the

Increment/Decrement keys. Press Enter.

D. Press the SELect key, then use the

Increment (or Decrement) key to select
“Disabled” (or “Enable”).

E. Press Enter. The logic mask is now

disabled (or enabled).