Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 193
5–83
Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 1 Text 3] — P.251
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
108
Maximum Value:
127
[Process 1 Text 4] — P.252
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
116
Maximum Value:
127
[Process 1 Text 5] — P.253
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
115
Maximum Value:
127
[Process 1 Text 6] — P.254
Sets the “User Units” description for the value
determined by [Process 1 Par] and [Process 1
Scale]. The 8 character description will be
shown on line 1 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value:
127