Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 110)

4–38 Start–Up and Adjustment
Publication 1397-5.0 — June, 2001
There are several parameters associated with the use of the 1397
Drive for specific applications. At this point, the basic Drive control
has been tuned for simple speed control. If it is desired to operate
the Drive using one of the optional functions, refer to Chapter 5 for a
description of the parameters associated with these functions. In
addition to set up of the Drive parameters associated with these
functions, it is also necessary to verify correct configuration of the
Source to Sink Parameters for the external control device being used
to control the Drive for the specific application. Refer to the
appropriate adapter board instruction manual for a description of
how to use the adapter board and how to interface the adapter board
to the Drive when various Drive functions are desired.
Application Set–Up