Rockwell Automation 1397 DC Drive Firmware 2.xx User Manual
Page 196
5–86
Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 2 Text 5] — P.263
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value
127
[Process 2 Text 6] — P.264
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value
127
[Process 2 Text 7] — P.265
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value
127
[Process 2 Text 8] — P.266
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units:
Numeric/Text
Parameter Range:
Alphanumeric
Parameter Type:
Read & Write
Group:
Process Display
Minimum Value:
32
Factory Default:
32
Maximum Value
127