Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 63)

3–5 Programming Terminal
Publication 1397-5.0 — June, 2001
When power is first applied to the Drive, the HIM will cycle through
a series of displays. These displays will show Drive name, HIM ID
number and communication status. Upon completion, the Status
Display will be shown.
Figure 3.3
Status Display
This display shows the current status of the Drive (i.e. “Ready,”
“Running,” etc.) or any faults that may be present. The Status Display
can be replaced by the Process Display or Password Login menu. See
appropriate sections on the following pages for more information.
From this display, pressing any key will cause “Choose Mode” to be
displayed. Pressing the Increment or Decrement keys will allow
different modes to be selected as described on the pages that follow.
Display
When selected, the Display mode allows any of the parameters to be
viewed. However, parameter modifications are not allowed.
Program
Program mode provides access to the complete listing of parameters
available for programming.
Process
The Process mode displays two user-selected parameters with text
and scaling programmed by the user.
Search (Available on Series B HIM only)
This mode will search for parameters that are not at their default values.
Control Status (Available on Series B HIM only)
Permits the drive logic mask to be disabled/enabled allowing HIM
removal while Drive power is applied. This menu also provides access
to a fault queue and a warning queue which will list the last ten faults or
alarms, respectively that have occurred. “Trip” displayed with a fault
indicates the actual fault that tripped the Drive. A clear function clears
the queue – it will also clear an active fault/alarm condition.
Password
The Password mode protects the Drive parameters against
programming changes by unauthorized personnel. When a password
has been assigned, access to the Program/EEProm modes and the
Control Logic/Clear Fault Queue menus can only be gained when the
correct password has been entered. The password can be any five
digit number between 00000 and 65535.
HIM Operation