Rockwell Automation 1397 DC Drive Firmware 2.xx - Manual (Page 62)

3–4 Programming Terminal
Publication 1397-5.0 — June, 2001
Up/Down Arrows (only available with digital speed control)
Pressing these keys will increase or decrease the HIM
reference command. An indication of this command will
be shown on the visual Speed Indicator. The Drive will
use this reference if the HIM is the selected reference
source.
Pressing both keys simultaneously stores the current
HIM reference command in HIM memory. Cycling
power or removing the HIM from the Drive will set the
reference command to the value stored in HIM memory.
If the Analog Speed Potentiometer option has been
ordered, the Up/Down keys and Speed Indicator will be
replaced by the pot.
Speed Indicator
Illuminates in steps to give an approximate visual
indication of the commanded speed.
If the Analog Speed Potentiometer option has been
ordered, the Up/Down keys and Speed Indicator will be
replaced by the pot.