Rockwell Automation 22D PowerFlex 40P User Manual, FRN 3 - Manual (Page 54)

3-8 Programming and Parameters
Basic Display Group (continued)
b024 [Drive Temp]
Present operating temperature of the drive power section.
Values Default: Read Only
Min/Max: 0/120 degC
Display: 1 degC
b025 [Counter Status]
The current value of the counter when counter is enabled.
Values Default: Read only
Min/Max: 0/9999
Display: 1
b026 [Timer Status]
32 bit parameter.
The current value of the timer when timer is enabled.
Values Default: Read Only
Min/Max: 0.0/9999 Secs
Display: 0.1 Secs
32
b028 [Stp Logic Status]
When P038 [Speed Reference] is set to 6 “Stp Logic” or 9 “Positioning”, this parameter will display the
current step of the Step Logic profile as defined by parameters A140 - A147 [Stp Logic x].
Values Default: Read Only
Min/Max: 0/8
Display: 1
b029 [Torque Current]
The current value of the motor torque current.
Values Default: Read Only
Min/Max: 0.00/(Drive Rated Amps
×
2)
Display: 0.01 Amps