Rockwell Automation 22D PowerFlex 40P User Manual, FRN 3 - Manual (Page 44)

2-2 Start Up
Applying Power to the Drive
❏
6. Apply AC power and control voltages to the drive.
Start, Stop, Direction and Speed Control
Factory default parameter values allow the drive to be controlled from
comms. No programming is required to start, stop, change direction and
control speed directly from comms.
Important: To disable reverse operation, see A095 [Reverse Disable].
If a fault appears on power up, refer to Fault Descriptions on page 4-3
for an explanation of the fault code.
Variable Torque Fan/Pump Applications
For improved motor tuning performance when using a premium efficient
motor on a variable torque load, set
A084 [Boost Select] to option 2
“35.0, VT”.