D316, D314 [fault 8 code, D315 [fault 9 code – Rockwell Automation 22D PowerFlex 40P User Manual, FRN 3 User Manual
Page 111
Programming and Parameters
3-65
d314 [Fault 8 Code]
(With FRN 3.xx and later.)
A code that represents the eighth most recent drive fault. The codes will appear in these parameters
in the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 9 Code] and this
parameter will be overwritten by [Fault 7 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d315 [Fault 9 Code]
(With FRN 3.xx and later.)
A code that represents the ninth most recent drive fault. The codes will appear in these parameters in
the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will be moved to [Fault 10 Code] and this
parameter will be overwritten by [Fault 8 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1
d316 [Fault 10 Code]
(With FRN 3.xx and later.)
A code that represents the tenth most recent drive fault. The codes will appear in these parameters in
the order they occur (
[Fault 1 Code] = the most recent fault). Repetitive faults will only be
recorded once. As faults occur, the value of this parameter will overwritten by [Fault 9 Code].
Refer to
for fault code descriptions.
Values
Default:
Read Only
Min/Max:
0/122
Display:
1