ETC Cobalt Family v7.1.0 - Manual (Page 978)

Cobalt 7.1 - 20140612
977
Remote Control - RFR Radio Remote
The RFR Radio Remote provides bi-directional remote control with a
hardware designed for stage environment. All of the RFR functions are the
same for iRFR.
The RFR works within its own field and this field can be cleared from the console. All channel
intensity levels generated by the remote can only be recorded into targets from the remote control
itself.
Connecting the RFR
It's possible to connect the RFR in the following ways to a Cobalt.
• Directly with USB
• To a base station connected with USB
• To a base station connected with Net3, which requires ACN protocol to be turned on.
Hold the decimal point when starting the RFR to get a choice of connection methods.
Group and frequency can be changed if necessary or if you have multiple units. The HF (frequency)
and Network ID (group) are changed in the remote from the remote menu, and in the base station from
the system settings. See
System Settings - RFR.
RFR - General Functionality
The upper display line shows information about the selected channel(s). The labels for the soft buttons
are on the two lower rows of the display. In all displays the wheel controls the level of selected
channels - except in the parameter controls display where the two encoders control the displayed two
parameters (like pan/tilt, etc...)