ETC Cobalt Family v7.1.0 - Manual (Page 948)

Cobalt 7.1 - 20140612
947
Master control functions
DESCRIPTION SYNTAX
Activate the Master View* [MASTER]
Open the Master Editor.
[MODIFY] &
[Master_Key]
Set an individual flash level (in flash mode)
[#] [FLASH_MODE] &
[Master_Key]
Toggle a master on/off [START] &
[Master_Key]
Toggle master # on/off [#] [START]
Fade a master to a specific level [#] [START] &
[Master_Key]
Hold FLASH MODE and press master keys to toggle
modes. Use PAGE +/- to select functions. [FLASH_MODE] &
[Master_Key]
Connect a master playback to the Master playback [CONNECT] &
[Master_Key]
Tap tempo for sequence on a master (hold tap and tap
Master key). [TAP] & [Master_Key]
*You can also click on the Master View node in the Browser.