ETC Cobalt Family v7.1.0 - Manual (Page 900)

Cobalt 7.1 - 20140612
899
Console Key - CHECK -
The CHECK - key is used for the Channel Check function.
• [CHECK -] - Make a channel check to the previous channel with the current level.
No keyboard equivalent
Console Key - CLEAR CHANGED
CLEAR CHANGED is a soft key in the DEVICE menu of the console main display. It is used
together with the attribute record setting "Changed" to clear the Set Changed flag on parameters that
have been changed, so they will not be recorded.
• [SET CHANGED] & [PALETTE] - Set all parameters for the selected channels to not
changed.
• [SET CHANGED] & [FOCUS] - Set Focus parameters for the selected channels to not
changed.
• [SET CHANGED] & [COLOR] - Set Colorparameters for the selected channels to not
changed.
• [SET CHANGED] & [BEAM] - Set Beam parameters for the selected channels to not
changed.
• [SET CHANGED] & [wheel parameter key] - Set this parameter for the selected channels to
changed.
For more information see Devices - Recording .
There is no keyboard equivalent.
Console Key - CLIENT
The CLIENT key is used to activate and deactivate external access from network clients, and to set
permissions.
• [CLIENT] - Activate or deactivate.
• Hold [CLIENT] - Set permissions from the Direct Select keys.
For more information see Network - Client .
There is no keyboard equivalent.
Console Key - Cobalt Encoder
The COBALT ENCODER keys are endless encoders that allow you to set values AND there is a click
in them that sets the field/parameter to zero/full or a value (#) similar to the
Parameter Wheel Keys .