ETC Cobalt Family v7.1.0 - Manual (Page 811)

Cobalt 7.1 - 20140612
810
Masters - Times
Masters can have In, wait and out times. These times can be used by
• Flash on time
• Master Links
• The START function
• Manual fades
Set In-Wait-Out times for a Master
In times can be set with a key shortcut. Wait and out times are set from the master editor.
In Time
Function Keys Feedback
Set In time
[#] [TIME] &
[Master_Key]
The time # is assigned to
the Master as an In time.
In, Wait and Out time
These times can only be assigned from the Master List.
1. Open the master list using [MODIFY] & [MASTER] or from the Browser >Masters >MasterList.
2. Set In, Wait and Out times.
Master settings for times
These are the settings you can set individually for master times.
Hold SETUP and press the Master key to open the settings. See Masters - Settings .
These are the settings that affect times, and only for content where times apply.
Function Function
Fader Intensity With "Follow Master Time" Fader will never fade
faster than the fade time
Flash: Use time Flash will use master time