ETC Cobalt Family v7.1.0 - Manual (Page 280)

Cobalt 7.1 - 20140612
279
NOTE
When you patch a template with multiple parts, separate devices will be
created for the various parts and decimal channel numbers will be assigned.
Changing the start address of the base channel will update the sub devices
accordingly.
Edit/Change a Device
You can exchange one moving device with another in the Device List. All parameters that are similar
will continue functioning.
Function Where Explanation
Change Device Type* Device Settings ,
Template column
Press MODIFY to get a
dropdown with all
templates. Select a new
device template.
Change Device Address Device Settings ,
Device Address
column
Enter a new device address
with address.universe. You
can change universe only
by ".universe"
Change Device Channel Device Settings ,
Device Channel
column
Enter a new device
channel.
Delete Device Device Settings Press DELETE in any row.
* All play information that can be read by the replacement device template will be used. You can
swap back to the first device at anytime later. This is useful if you have to replace one type/brand of
Moving Device with another.