ETC Cobalt Family v7.1.0 - Manual (Page 158)

Cobalt 7.1 - 20140612
157
System Settings - Output
These are the settings for the DMX outputs of the consoles, and ethernet to visualizers.
Visualizer Link
Activates bi-directional communication with third party visualisation tools.
NOTE
When the software is started in Offline mode there is no DMX output.
DMX SETTINGS
Local DMX Output
Set the start output and output speed for the DMX outputs of the consoles. The main reason for
changing output speed is that you are controlling older equipment that isn't compatible with full speed
DMX.
Disable Local RDM
This checkbox allows you to deactivate local RDM on the DMX ports of the console.
DMX Input mode
You can activate DMX input for one DMX universe (selectable) though an ETC node from an EDMX
or sACN universe and map it to a channel which will be the start channel for that universe. When
DMX input is activated, master playback 20 will act as a master for the DMX input.