ETC Cobalt Family v7.1.0 - Manual (Page 911)

Cobalt 7.1 - 20140612
910
Console Key - IN
The IN key is used to set In times to the sequence step in the A or B field of the Main Playback
(depending on the Time Settings).
• [#] [IN] - Set an in time.
• [#] [DELAY ] & [IN] - Set a Delay In time.
For more information see Sequences - Times , Sequence Times - Set To A or B
Keyboard equivalent: [CTRL] & [I]
Console Key - INDEPENDENTS 7,8,9
The three keys and potentiometers in the Independents area of the consoles are used to control lights
outside the main functionality of the console - for example houselights or worklights. They can
operate in three modes: Inclusive, Inhibit and Exclusive.
• [SETUP] & [independent key] - Open the settings.
• [SETUP] & [independent pot] - Hold SETUP, then move and let go of an independent
potentiometer to open the settings.
For more information see Independents .
There is no keyboard equivalent
Console Key - INSERT
The INSERT key is used to insert new data in a list. In some lists a number is required, in some not. A
new item is usually inserted after the current item.
• [INSERT] - Insert a new item in a list.
• [#] [INSERT] - Insert a new item with this number in a list.
For more information see Editing In Lists .
Keyboard equivalent: [INS]
Console Key - INV GROUP
The INV GROUP key is used to invert the current channel selection and select all other channels with
a level over 0% in a channel view.
• [INV GROUP] - Invert the current channel selection.