ETC Cobalt Family v7.1.0 - Manual (Page 487)

Cobalt 7.1 - 20140612
486
Channels - Next & Last Mode
The NEXT and LAST keys in the programming section will sub-select singel channels in the current
channel selection, in the order they were selected. The focused channel is mapped to intensity and
parameter controls so you can adjust it individually. Press SELECT ALL to exit Next/Last mode.
Action Key Feedback
Activate Next/Last
[NEXT]
The first channel in the
current channel selection is
marked as red, and mapped
to the level and device
controls. LAST can be used
as well.
Step forward [NEXT] Channels are focused in the
order they were selected.
The focused channel is
highlighted in red in the
active Channel View*
Step backwards [LAST] Same as above, but
backwards.
Leave Next/Last mode [SELECT_ALL] All channels are selected
again
*The currently focused channel is highlighted in red.