Presets - record – ETC Cobalt Family v7.1.0 User Manual
Page 344
Cobalt 7.1 - 20140612
343
Presets - Record
The RECORD key in the
programming section
allows you to record the output on stage, or part of it,
to a Preset. What you see in the active Channel View is what is recorded. Normally only changed
moving device parameters are recorded.
Function
Key
Feedback
Record new
[RECORD]
Record the content of the
selected Channel View to a
new Preset with the next
free number. You will get a
popup. See
The Recording
Popup
Record new #
[#] [RECORD]
Records preset #. You will
get a popup. See
The
Recording Popup
NOTE
You can define how moving device parameters are stored in the Record
Settings. Hold SETUP and press RECORD.
A recorded Preset is always added to the Preset List (Browser >Presets).
If there are moving devices defined and you are using "Changed" recording
mode, the first preset in an empty sequence will ask you if you want to make
a block cue.