ETC Cobalt Family v7.1.0 - Manual (Page 470)

Cobalt 7.1 - 20140612
469
Channels - Capture Mode
The CAPTURE key in the programming section allows you to capture a channel or device and control
and record it regardless of where it is output from in the system. Captured levels are considered to be
changed at all times and will be recorded into Presets accordingly. A Catpured channel/device stays
this way until released with the RELEASE key.
You can capture a channel/device by selecting the channel(s), holding CAPTURE and pressing CH or
moving the level wheel, and you can activate Capture Mode (by pressing CAPTURE twice) in which
any channel/device that is changed will be captured until release.
The channel number background of a captured channel is red.
RECORD will store the captured level.
It is possible to work in a permanent Capture mode, and there are functions for Capturing any part of a
ch.
As soon as Capture is active for a channel or parameter, this is indicated at the top of all screens.