ETC Cobalt Family v7.1.0 - Manual (Page 780)

Cobalt 7.1 - 20140612
779
Main Playback - Default Settings
Hold SETUP and press PLAYBACK to open these settings.
These are the default settings for the functions of the Main Playback.
Setting Feedback
Modify Sequence When active, this mode will suppress all wait times
and master links.
Build Sequence When active (default) all presets recorded in A
(Live) will be added to the sequence.
Followon Wait times will be treated as Followon times,
counting from GO instead of from the completion of
the last fade.
GOTO jumps to The default is PRESET, you can set it to STEP.
Crossfade both ways The default setting for a manual crossfade
is upwards. You can set it both ways.
Don't Advance Playback When this is checked, the sequence in the main
playback will not advance automatically.