ETC Cobalt Family v7.1.0 - Manual (Page 334)

Cobalt 7.1 - 20140612
333
Groups - Select Channels
You can add and subtract channels that are stored in Groups to/from the current channel selection.
Function Key Feedback
Select
[#] [GROUP]
All channels in the
specified Group are
selected and can be
controlled by wheel or with
level functions.
Add [#] [GROUP] & [+] All channels in the
specified Group are added
to the current channel
selection.
Subtract [#] [GROUP] & [-] All channels in the
specified Group are
subtracted from the current
channel selection.
Select range [#] [GROUP]
[#] [GROUP] &
[THRU] All channels stored in
every Group from # to
# are selected.
At mode syntax
If your Cobalt is set to use At Mode for channel commands, groups are selected in the same way as
channels once the GROUP key has been pressed. Press CHANNEL to return to channel selection.
Action Key Feedback
Select group mode [GROUP] From this point all select
functions apply to groups.
Select group
[#]
Group # is selected
Add group [+] [#] Group # is added to the
current selection
Subtract group
[-] [#]
Group # is subtracted from
the current selection
Add multiple group [#] [THRU] Up to group # is added to
the current selection